Uberti / Cimarron Model P (EXTENDED) Rosewood Grips

Description

These grips will replace the one-piece grips. They do still lock inside the frame, similar to how the stock one-piece grips lock in.

You start by removing the two screws on the back of the grip frame by the hammer, and the one on the butt of the grip frame. Remove the grip frame and grip from the gun and separate the one-piece grip from the frame by rotating the top of the grip forward. You then reinstall the grip frame on the gun. *

Install the new two-piece grips just like you would any other two-piece grips and secure with the screw provided.

*NOTE- leave the top two screws slightly loose while tightening the bottom screw completely on the grip frame will make it easier to install the new grips. After the grip screw is installed, you can then tighten up the top two screws.